Current Meter Counters Model CMCsp

The Hyquest Solutions Current Meter Counter Signal Processor (CMCsp) is a small electronic device used to clean the signal from a mechanically rotating current meter such as a Price AA or Pygmy meter and directly reads the velocity on the LCD as well as interfacing to a PDA for computation of velocity and discharge. Meters using a cat whisker head and ball and wire contact to perform a mechanical switch closure can be used with the CMCsp to produce a clean, noise-free signal.

 

Main Features

  • Direct Velocity Reading
  • Digitally processes and ‘cleans’ signals from Catwhisker and Magnetic Head Meters
  • Operates with two ‘AA’ batteries
  • Works in high conductivity water( > 50,000µSiemens)
  • Self contained unit with 2 x 8 character LCD display showing total meter counts and elapsed time
  • Integrated Bluetooth Interface and RS232 Interface
  • Also operates with any Palm, PocketPC, or Field Computer.
  • Signal Driver for AquaCalc(s), Sutron DMX and HyQuest Solutions CMC Series Meter Counters
  • Fully compatible with USGS QCALC Discharge Measurement Software
  • Fully self calibrating
  • ‘Self Test’ for Serial Interface setup
  • Can be used to adjust Current Meter contacts (measures meter ‘Dwell Angle’)
  • Can display and produce ‘Spin Test’ record
  • Bluetooth®: Class 2 / Output power 2.5mW (4dBm), compliant Bluetooth® Spec V1.1, up to 10m (30ft) range (ope-rating at 2.4GHz)
  • Communications: RS232 Port (Tx, Rx) @ 19200 baud 8/N/1
  • Connections: 2x Banana plug sockets (Meter input), 1 x DB9 female socket (RS232 + filtered meter o/p)
  • Indicators: 8 character x 2 line LCD, 1 x Orange LED, 1 x Red/Green/Blue LED
  • Power Source: 2 x Internal AA alkaline 1.5V batteries
  • Low battery indication 2.8V
  • Dimensions: 120mm x 80mm x 22mm (Lx W x D)
  • Weight: 218 grams (with batteries)
  • Environmental: -5oC to + 50oC, Non Condensing, IP65